How To Reset Your Router In Less Than 3 Minutes

How To Reset Your Router In Less Than 3 Minutes

In this article, we will go through all the steps you need to reset your router in less than 3 minutes. This can be very useful if you want to reset new settings you may have changed, or if you believe your router is running slowly or acting up.

How To Reboot Your Router

How To Reboot Your Router
How To Reboot Your Router

Step One: Locate Your Router

This step should be obvious but many people overlook this critical aspect of rebooting their router. They forget where they put it. Try to find a central location in your house for the router so that it’s easily accessible for rebooting. You don’t want to have to go digging through a closet every time you have Wi-Fi issues.

Step Two: Unplug your router.

I know this sounds simple but you’d be surprised at how difficult it is for some people. A lot of people don’t want to unplug their routers because they think something will break if they do. But trust me, unplugging the power from your router is not going to cause any damage whatsoever. Simply pull out the plug.

Step Three: Wait 30 seconds.

Now that you have unplugged it, wait for 30 seconds before you plug it back in. Why? When a computer is rebooting, you want to give the hardware time to fully cycle so it’s ready for use when you turn everything back on. If you don’t give your router enough time to reboot properly then you’re just wasting your time by rebooting it at all.

Step Four: Plug the modem back in.

Now that you’ve waited a minute to make sure everything is ready to go, go ahead and plug the modem back in. It will take a few minutes for the modem to start back up but eventually, all of the lights on it should be lit up.

Step Five: Plug the router back in.

After you’ve plugged the modem back in, go ahead and plug your router back in as well.

Step Six: Test to see if the issue is fixed.

Once you’ve swapped out the modem and router, try using your Wi-Fi again. If it works properly then you can continue with the rest of the steps.

Step Seven: Confirm that the router is functioning properly.

After you’re able to connect to your Wi-Fi again, go ahead and check the status page on your router to make sure everything is working properly. On most routers, you’ll be able to find this information in a menu or on a webpage somewhere on their website.

How To Reset Your Router With a Reset Button

Resetting your router can fix a number of issues, from speed problems to Wi-Fi connection crashes. Here’s how to reset your router and make it work like new.

Whether you’ve experienced a security breach or want to give your network a thorough cleaning, you may need to reset your router. Luckily, this step is easy. Follow the steps below to learn how to reset your router with a button.

Step One: Don’t unplug your router.

Resetting your router doesn’t mean unplugging it and plugging it back in — that’s just rebooting it. You need to actually reset it so that all the settings revert back to factory defaults. This won’t erase any of the data on your computer or mobile device, but it will change some settings on your router (like the password).

Step Two: Locate the reset button.

You’ll find a small pinhole button on the back of most routers. This is what you’ll use to reset the device. If you can’t find this button, check your user manual for instructions on where to find your model’s reset button.

Step Three: Hold the reset button for 30 seconds.

You’ll need to hold the button down for a good 30 seconds. Hold it down until the router’s lights start flashing and then release the button.

Step Four: Let the device power back on.

Once you’ve released the button, your router should power itself back on. This may take a few minutes — just be patient! If your router was having an issue, this should fix the problem.

How To Reset a Router Without a Reset Button

How To Reset a Router Without a Reset Button
How To Reset a Router Without a Reset Button

Step One: Find your router’s IP address.

The first step is to find your router’s IP address. This is usually on the bottom or side of your router. Sometimes it might be in the documentation that came with your router as well.

If you can’t find it, then you can use the command prompt and type “ipconfig” into the Command Prompt window and hit Enter. Your default gateway will be displayed in the results, which is typically the IP address of your router.

Step Two: Enter your username and password.

The next step is to find your username and password. If you can’t find it, then you will probably have to call your Internet provider to get that information. However, many router’s default usernames and passwords are common, so we’ll list some of the most popular below.

If you don’t have the username or password, then you’ll need to contact your Internet provider and ask them for the information.

Step Three: Locate System or System Tools.

If you can’t find the username and password, then you can use the command prompt to try and access your router. In order to do this, you need to locate the installation CD that came with your router. If there is one, then it should be in the documentation that came with your router. If not, then you will have to find a way to get into your router’s setup page without using a web browser or FTP program.

Step Four: Locate System Restore or find the return to factory settings option.

If you can’t find the username and password, then you can use the command prompt to try and access your router. In order to do this, you need to locate the installation CD that came with your router. If there is one, then it should be in the documentation that came with your router. If not, then you will have to find a way to get into your router’s setup page without using a web browser or FTP program.

Step Five: Let the router reboot.

Once you have found your username and password, login to your router. If you have a wireless router, then you’ll need to find the SSID of the wireless network that you are using. Once you are in, it’s time to let your router reboot. To do this, turn off the power to your router. It should tell you how many seconds it will wait before rebooting.

What’s The Difference Between Rebooting a Router and Resetting a Router?

The Difference between rebooting and resetting a router is that rebooting is software restart while resetting is the factory reset. Sometimes when we talk about resetting a router, it means reverting the device back to its factory settings, which will clear all configuration settings and Wi-Fi passwords. This can be helpful if you are having issues with your router or want to sell your device.

To reboot your wireless router simply unplug the power cord and plug it back in. This will cause your wireless router to function like a freshly out of the box device. Any custom settings such as port forwarding will be lost.

To reset your wireless router to its factory setting; there should be a small reset button on your router. You need to press and hold that button for 30 seconds without letting go until all lights flash simultaneously. This will take 30 seconds or more but after that, all custom settings are erased and it’ll function just like it was out of the box for the first time.

When Should I Reboot My Router?

There are several reasons you might want to reboot your router. If your device is acting sluggish, rebooting can help by clearing out any processes that have built up over time. A reboot also works if you’re having trouble accessing the internet or your computer isn’t able to find other devices on your network (like printers).

If you’ve changed any settings on your router recently, rebooting is a good way to make sure they take effect. For example, if you just set up port forwarding, rebooting ensures that all changes save and take effect properly.

Should I Try Reboot My Router?

Sometimes, rebooting your router can fix problems with your internet connection that seem unrelated to the router itself. For example, if your computer has been infected by malware, it could be using up your bandwidth without you knowing. Rebooting the router forces all the devices on the network to reconnect, which could kick the malware off the network — at least temporarily. This is particularly true if you have a habit of leaving devices connected to your network even when you’re not using them. Most routers have built-in tools for identifying exactly which devices are connected, so use them to see what’s on your network if you’re suspicious about this sort of thing.

In addition to malware infections, rebooting your router can help if you’re unable to access any websites or anything on the internet seems unusually slow. This is because rebooting flushes out old DNS entries and refreshes them from scratch — DNS is what translates domain names like “” into IP addresses that the internet’s underlying networking protocols use. In other words, many of the problems you think are happening at a router level could actually be problems at the DNS provider level — if your DNS settings get corrupted, it can make it so that you can’t reach any webpages, to say nothing of your router’s own configuration menus.

It’s worth noting that this doesn’t clear out your internet browser cache and other temporary data.

How Often You Should Reset/Reboot your Devices

While most devices will benefit from a reset or reboot, doing so on a regular basis isn’t always necessary. To help you figure out how often you should reboot your devices, we’ve put together a list of some of the most common tech and how often you should reset them.

The Computer

We’d recommend restarting your computer at least once a week. It helps to clear out any rogue programs that may be running in the background and it can help improve performance by clearing out temporary files that may have built up over time. You’ll also want to restart your computer after updating software to make sure the new updates are installed correctly and that they’re running properly.

The Router

If you’ve ever experienced slow internet speeds or dropped connections, then you know how frustrating it can be. While the internet is rarely 100% reliable, there are ways to keep things running smoothly. One of those ways is by restarting your router every now and then. Restarting your router clears out any temporary files that could be clogging up its inner workings and allows everything to run as smoothly as possible. An easy way to remember when to restart your router is to add it to your calendar every month or so (you can do this using a monthly reminder app) and then do it once a month, on the same day. This can prevent slow internet speeds and dropped connections.

The Smartphone or Tablet

Often, rebooting your smartphone or tablet is all that’s needed to get things working properly again. If you’re having issues with your touchscreen or running into any bugs, you’ll want to restart your device to see if that helps resolve the issue. We’d recommend doing this at least once every week or two, just so everything can run smoothly.

The iPod or MP3 Player

Just like a smartphone or tablet, restarting your iPod or MP3 player is a great way to make sure everything is running smoothly. Additionally, you should also make sure you keep your music library updated on a regular basis. While this isn’t absolutely necessary, outdated music files can sometimes cause issues with older players and could even be responsible for random crashes. We’d recommend checking your music library once every week or two and updating it if necessary.

The Smart TV

If you’ve ever turned on your smart TV only to find that it takes a long time to load or that the apps are all acting a little buggy, you’ll want to reset your Smart TV. By resetting your TV, you’ll be able to eliminate any temporary files, and this will often clean up any issues that could be causing problems. If you experience issues with your Smart TV often, then it may be worth investing in an over-the-air DVR system.


The tips above should help you know how to reset your router easily and quickly when the need arises. In addition, they’ll allow you to troubleshoot and optimize your at-home wireless setup if you have one. Whatever the case may be, this is a simple process that just about anyone can handle.